Fabrication WK2: 5 objects
This week I chose to make Lego style wood blocks for my 5 identical objects. The blocks can stack on top of each other in different combinations like Lego blocks
I begin my process by cutting out the wood blocks at the band saw, all 5 were cut in the same session so they can be the same size.
Next, holes are drilled on the blocks using the circle saw drill. This part was tricky because the material from the hole would often break, and I had to glue the broken parts together later to be used as the part for putting into the hole of the wood.
Then, the parts are glued together with wood glue, clamped together.
Lastly, the side surfaces of the Lego wood blocks are sanded to polish the surface.